Binzel ABIMIG WT Instructivo De Servicio página 16

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product description
3.1 Technical Data
3.2 Signs and symbols used
4 Putting into operation
4.1 Equipping the torch
4.2 Mounting the wire guide
4.2.1 Liner
4.2.2 PA liner
4.2.3 Torch neck liner
4.3 Connecting the cable assembly
4.4 Connecting the coolant
4.5 Setting the shielding gas quantity EN-10
4.6 Feed-in wire
EN - 2
EN-3 5
EN-3 5.1
EN-3 6
EN-3
EN-3 7
EN-4
8
EN-4 8.1
EN-4 8.2
EN-5 8.3
EN-6 9
EN-6
EN-7
EN-7
EN-8
EN-9
EN-9
EN-9
EN-10
Operating elements
2-cycle function of the trigger
Operation
Putting out of operation
Maintenance and cleaning EN-13
Cleaning the wire guide
Replacing the torch neck
Cleaning the torch neck
Disposal
®
ABIMIG WT
EN-11
EN-11
EN-11
EN-12
EN-14
EN-14
EN-15
EN-15