Emergency Information; Product Description; Technical Data - Binzel ABIMIG WT Instructivo De Servicio

Mig/mag antorcha de soldadura
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3 Product description

2.3 Emergency information

3 Product description

3.1 Technical Data

Transport and storage
Relative humidity
Tab. 1
Ambient temperature
Type of voltage
DC polarity of the electrodes
Shielding gas (DIN EN ISO 14175)
Wire types
Tab. 2
General torch data according to EN 60 974-7
EN - 4
NOTICE
Describes the risk of impairing work results or potential material damage to
the equipment.
In the event of an emergency, immediately disconnect the following supplies:
• Electrical power supply
• Coolant supply
• Gas supply
Additional measures can be found in the operating instructions for the power
source or the documentation for other peripheral devices.
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals, and
material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without
authorization.
• The device may be used only by qualified personnel (in Germany, see
TRBS 1203).
- 25 °C to + 55 °C
up to 90 % at 20 °C
DC
Usually positive
CO
and mixed gas M21
2
commercially available round wires
®
ABIMIG
WT

Publicidad

Tabla de contenido
loading

Tabla de contenido