Federal Signal SSTX3-MV Instrucciones De Instalación página 4

II. SPECIFICATIONS.
Operating Voltage /Current:
Weight (approx.):
Size:
Construction:
Sound Output [on axis at 10 feet (3m)]:
• Wail:
• Yelp:
• Horn:
Hazardous Location Ratings:
Approval Agency Listings:
III. INSTALLATION.
Unpacking.
A.
After unpacking the speaker, examine it carefully for possible damage that may
have occurred in transit. If equipment has been damaged, immediately file a claim with the
carrier stating the extent of the damage. Carefully check all shipping labels and tags for special
instructions before removing or destroying them.
Mounting Arrangements.
B.
The speaker can be mounted on any relatively flat surface capable of supporting
the speaker's weight. Conduit connections can be made to the �" NPT threaded openings at
bottom of the housing.
Property damage, serious injury, or death could occur if an accumulation of water,
snow, dust, etc. resides in the speaker projector, severely reducing or preventing
operation of this device. Mount the unit so speaker projector is pointed horizontally
or slightly downward.
1. Remove the two �"-13 hex head bolts, flat washers and lock washers that
secure the mounting bracket to the unit. Disconnect the lanyard from the mounting bracket at
the cotter ring.
2. Select the mounting location.
Voltage
120VAC, 50/60 Hz
240VAC, 50/60 Hz
24VDC
16 lbs. (7.3 kg)
16.3" (414mm) long, 17.0"
(432mm) high, 13.1" (333mm) wide
Aluminum enclosure and adjustable steel
mounting bracket with a powder coat finish
108 dB(A)
108 dB(A)
102 dB(A)
Class I, Division 1, Groups B, C and D
Class I, Division 2, Groups A, B, C and D
Class II, Division 2, Groups F and G
Class III
Reference product nameplate
-2-
Current
210mA
120mA
600mA