Intended Use; Technical Description - Dometic ROLLERBLIND CHAIN Instrucciones De Montaje Y De Uso

Intended use

4 Intended use
The Rollerblind Chain is suitable for installation in yachts, boats, motor homes,
caravans or homes. The design and size of the blind are custom-made. The fabric of
the blinds is cut to the customer's specifications.
The blinds are designed for interior use only and should not be installed in bath-
rooms, wet rooms or other location with a high level of humidity.
This product is only suitable for the intended purpose and application in accordance
with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or mainte-
nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
5

Technical description

The blinds are available in three mounting types in different sizes:
• BR: Bracket mounted (available in sizes BR38 and BR46)
• MP: Mounting profile mounted (available in sizes MP38 and MP46)
• CA: Cassette mounted (available in sizes C1, C2 and C3)
There are different types of fabric restraints:
• FH: Free hanging
• GW: Guide wired (available as Dome (A), Flush Mount (B) and Extended (C), see
GW versions in fig. 1)
The number on the product label indicating the blind type is located:
• For BR versions on the tube under the fabric
• For MP versions on the back of the mounting profile
6
Rollerblind Chain
EN