Remote-Controlled, External Stop Not Activated; Remote-Controlled, External Stop Activated - Grundfos Hydro Multi-B Instrucciones De Instalación Y Funcionamiento

10.3 Remote-controlled, external stop not activated

In this mode, the system is remote-controlled, and the external stop via digital input is not activated.
If local settings are to be changed, follow the flow chart examples below.
3.5
or
OFF
Note
If the buttons are not touched for 3 seconds, the CU 323 will revert to the initial display.

10.4 Remote-controlled, external stop activated

In this mode, the system is remote-controlled, and the external stop via digital input is activated.
If local settings are to be changed, follow the flow chart examples below.
E.st
Note
If the buttons are not touched for 3 seconds, the CU 323 will revert to the initial display.
16
Keep pressed for 3 seconds
On On
Off Off
or or
BUS
or
or
Keep pressed for 3 seconds
On On
Off Off
or
or
BUS
or
or
See section 10.1 for changing
LOC
settings in local mode.
See section 10.2 for changing
LOC
settings in local mode.