Product Overview - General Toolsmart TS04 Manual Del Usuario

PRODUCT OVERVIEW

Fig. 1 shows the labels and positions of the controls, LCD and physical
structures of the meter. Fig. 2 shows all possible indications on the LCD.
Familiarize yourself with the functions and meanings of all controls, indications
and connectors before moving on to the safety, setup and operating instructions.
1. LCD
2. Activates Bluetooth transmission
3. Range selector. Selects Autoranging or
Manual Ranging mode and specific
manual range, if manual ranging is
selected (see page 8)
4. Four-function FUNC button. 1) Toggles
between AC and DC measurement with
the rotary dial in the ,
position. 2) Selects resistance
measurement, continuity checking or
diode checking with the rotary dial in
Ω
the position. 3) Toggles between ºC
and ºF units with the rotary switch in the
TEMP position. 4) Disables the meter's
Auto Power Off function when pressed
and held while moving the rotary
function switch out of the OFF position.
5. Data hold button. "Freezes" the display when pressed. Cancels the hold
function when pressed again.
6. Rotary switch. Selects the meter's primary function.
7. A input jack
8. COM input jack
TEMP
9. main input jack (for all functions except measuring current >400mA)
mAµAVΩ
10. NCV sensor and visual indicator (red LED)
11. Battery compartment cover/flip-up stand (on back)
4
, or
µA mA
A
Fig. 1. The DMM's controls,
indicators and
physical features