Disc Operation - Panasonic SC-PT665 Instrucciones De Funcionamiento

Disc trays
Disc tray(s) cannot open.
"CHGR ERR" is displayed.

Disc operation

It takes time before play starts.
[MP3]
A menu screen appears during
skip or search. [VCD]
Playback control menu does not
appear. [VCD] with playback control
Program and Random play do not
work. [DVD-V]
No subtitles.
Point B is automatically set.
The Setup menu cannot be
accessed.
Sound
Sound is distorted.
Effects do not work.
Humming is heard during play.
No sound.
No sound from the TV.
No surround sound.
Picture
The picture on the TV is not
displayed correctly or disappears.
Picture size does not fit the
screen.
Menu is not displayed correctly.
Auto zoom function does not work
well.
≥ Press [Í] to release the jammed tray(s) as the unit will switch off. Switch it on again and the
tray(s) will initialize to the previous tray(s) condition. If this still does not fix the problem, please
consult the dealer.
≥ Play may take time to begin when an MP3 track has still picture data. Even after the track starts,
the correct play time will not be displayed. This is normal.
≥ This is normal for Video CDs.
≥ Press [∫ STOP] twice and then press [1 PLAY].
≥ These functions do not work with some DVD-Videos.
≥ Display the subtitles. ("SUBTITLE" in Menu 1)
≥ The end of an item becomes point B when it is reached.
≥ Select "DVD/CD" as the source.
≥ Cancel Program and Random play.
≥ Noise may occur when playing WMA.
≥ When using the HDMI output, audio may not be output from other terminals.
≥ Some audio effects do not work or have less effect with some discs.
≥ An AC supply cord or fluorescent light is near the main unit. Keep other appliances and cables
away from the main unit.
≥ There may be a slight pause in sound when you change the play speed.
≥ Audio may not be heard when more than 4 devices are connected with HDMI cables. Reduce the
number of connected devices.
≥ When using the HDMI connection, ensure that "AUDIO OUT" in the "HDMI" menu is set to "ON".
≥ If the input source is bitstream, set the sound setting to PCM on the external equipment.
≥ Confirm the audio connection. Press [RADIO/EXT-IN] to select the corresponding source.
≥ Press [
PLII] to turn on Dolby Pro Logic II or turn on Surround Enhancer.
≥ Ensure that the unit is connected directly to the TV, and is not connected through a video
cassette recorder.
≥ Mobile telephone chargers can cause some disturbance.
≥ If you are using an indoor TV antenna, change to an outdoor antenna.
≥ The TV antenna wire is too close to the unit. Move it away from the unit.
≥ Picture may not be seen when more than 4 devices are connected with HDMI cables. Reduce
the number of connected devices.
≥ When using the COMPONENT VIDEO OUT terminal, ensure that progressive output is not
selected when the connected TV is not progressive compatible. Press and hold [CANCEL] until
"PRG" disappears from the main unit display and the picture is displayed correctly.
≥ When using the HDMI AV OUT terminal, ensure that video output unacceptable with the
connected TV is not selected. Press and hold [CANCEL] until the picture is displayed correctly.
(The output will return to "480p".)
≥ Video images converted to 1920k1080 resolution may look different from the true, native 1080p
full-HD sources. This is not malfunction of the main unit.
≥ Change "TV ASPECT" in the "VIDEO" menu.
≥ Use the TV to change the aspect.
≥ Change the zoom setting. ("ZOOM" in Menu 2)
≥ Restore the zoom ratio to "NORMAL". ("ZOOM" in Menu 2)
≥ Turn off TV's zoom function.
≥ Zoom function may not work well, especially in dark scenes and may not work depending on the
type of disc.
—
—
—
—
—
18
—
—
16
—
—
—
—
—
—
22
—
7, 8, 28
26
7
—
—
—
—
21
19
—
21
—
19
19
—
—
(Continued on next page)
33