Indesit MWI 120 SX Manual De Instrucciones página 12

Ocultar thumbs Ver también para MWI 120 SX:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
Press the Push&Go button to start the
function.
When The Cycle Is Finished:
Press the Stop button.
Remove the container.
Use a soft cloth or a paper towel with
mild detergent to clean the interior
surfaces.
Tips and suggestions:
For a better cleaning result, it is
recommended to use a container with a
diameter of 17-20cm, and a height that
is lower than 6.5cm.
It is mandatory to use a container of light
plastic material that is suitable for the
microwave.
As the container will be hot after
the cleaning cycle is completed, it is
recommended to use a heat resistant
glove when removing the container
from the microwave oven.
For a better cleaning effect and removal of
unpleasant odors, add some lemon juice
or vinegar to the water.
MUTE OFF
T
HIS FUNCTION ALLOWS YOU
vate all the sounds played by the applan-
ce, includes button press, warnings, alarm,
even end of the function.
Press Easy Clean button for 3 seconds to
put into mute, press the same button for 3
seconds again to turn on the sound.
This function can operate at any time.
12
to activate/deacti-
EASY COOKING MENU
A
SELECTION OF AUTOMATIC RECIPES
algorithms to offer optimal cooking results.
Press the Easy Cooking button.
Press Easy Cooking button repea-
tedly or press the +/- button to select
the desired recipe (see the following
table).
Press the Push&Go button to confirm
the recipe and press the +/- button
to select the weight amount in below
table.
Press the Push&Go button.The func-
tion will start.
NOTE:
According to the selected recipe, after a
certain time, the display would ask you to
add or turn or stir the food. See "Add/Stir/
Turn food" chapter on page 7.
NOTE:
The cooking recipe will be confirmed once
you leave the function button for 3 seconds,
press the Easy Cooking button again to ch-
ange the recipe type.
GB
with preset

Publicidad

Tabla de contenido
loading

Tabla de contenido