FAS International SPIRALI HDR Manual Del Usuario página 58

12
E
N
G
L
I
S
5) To switch on the machine, follow the instructions below:
H
• Open the door and switch the general switch to "I" (on).
• Insert the interlock key into the upper micro-switch (marked POWER) located close to the electrical
panel.
•
If the message "MEMORY CLEARED" appears on the display, press the button on the main board
inside the box of the coin dispensing mechanism to initialize the memory. The message "DOOR OPEN,
MACHINE IN MAINTENANCE MODE" appears on the display. The vending machine will automatically
start a self-test. If no errors are identified, the machine is ready to use.
6) Programme the machine (see chap. "PROGRAMMING") and set the prices.
7) If the machine is supplied with change-giving mechanism, insert the corresponding coins in the change-
giving tubes.
8) Load the machine with products (see paragraph Loading the products).
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
For mod. "Panzer" L: Regolate the support so that the door could be closed without
any effort. Mount the leg cover which acts as a safety grill.
DO NOT insert the interlock key into the lower micro-switch (DOOR) as this will
cause the movement of a number of parts and may cause accidents.
Spirali HDR Panzer - Issue 00