Installation Instructions - USRobotics 5464 Guía Breve De Instalación

English

Installation Instructions

Step One: Connect Your Router
1. Connect your DSL or Cable modem to the router:
A. Power off your computer and your DSL or Cable modem.
B. Connect the provided antennas to the back of the router.
C. Do one of the following:
If your modem connects to your computer with an Ethernet cable: Locate
the Ethernet cable that connects your DSL or Cable modem to your computer's
Ethernet adapter, and disconnect it from your computer only: do not disconnect
the cable from your DSL or Cable modem.
If your modem connects to your computer with a USB cable: Disconnect the
USB cable from both the modem and your computer. You will need another
Ethernet cable in addition to the one provided with the Wireless
Connect one end of the Ethernet cable to the Ethernet port on the back of your
DSL or Cable modem.
The USB port on the router is for connecting a USB printer only. Do not
N o t e :
connect your modem to the USB port on the router. For instructions on
connecting a USB printer to your router, see "Install a USB Printer" on
page 7.
English
N
dx Router.
3