Installation Instructions - USRobotics 5463 Guía Breve De Instalación

Installation Instructions

Step One: Connect Your Modem to the Router
1. Turn off your computer and your modem.
2. Locate the Ethernet cable that connects your modem to your compu-
ter's Ethernet adapter, and disconnect it from your computer only: do
not disconnect the cable from your modem.
3. Connect the free end of the Ethernet cable to the WAN port on the rear
of the router.
Step Two: Connect the Router to Your Computer
1. Connect one end of the supplied Ethernet cable to your computer's Eth-
ernet adapter.
2. Connect the other end to one of the router's LAN ports.
Step Three: Power Up the Network
1. Turn on your modem.
2. Connect the supplied power cord to the 9.0 VDC port on the router.
English
3