Install Filters; Finalize Installation - GE JV936 Manual Del Propietario E Instalación

11 INSTALL FILTERS

• Remove protective film covering the filters.
• Insert the filter into the "C" clips mounted to the
top of the vertical front panel.
• Tap the filter against one side to align with outside
opening.
• Pull the filter down into the lower slots at the
bottom of the filter support.
"C" Clip
Filters
• To remove the filters, grasp the handle, push the
filter up, and pull forward.
49-80520-9
Installation Instructions
Junction Box
Filter
Support

12 FINALIZE INSTALLATION

• Refer to the operating instructions to test all
controls.
19