Auto Power Off; Scanning Channels; Key Lock - Albrecht Tectalk FM+ Manual Del Usuario

transmitted after releasing the PTT button.
Press " " Key 9 times, the LCD will display "Roger".
Press " " or " " Key to turn on (display shows
off (display shows icon)
Press PTT to confirm and quit.
Or press " " key once, the last selection will be confirmed and
enter into next function selection.
After turning on Roger beep, LCD will display the RGR icon.
Auto Power Off (APO)
This function may help to save battery energy in case that You should
forget to switch off a radio after use.
Press " " Key 10 times, LCD displays
Press " " or " " Key to select auto power off time from 0 to 12
hours.
Press PTT button to confirm and quit.
Or press " " Key once to quit.
After turning on this function, LCD will display the
will automatically turn off the radio at designated time.

Scanning Channels

Press " " Key, LCD displays
channels automatically.
Note: If you press and hold the button longer than 2 seconds, it
will break the squelch noise and listen to the current channel.
The unit scans all channels one by one. It will stay on the
occupied channel. Press "
icon) or turn
icon.
icon and
icon. It will start to scan all
" or " " Key to continue scanning.
If there is no signal, it will continue to scan.
Press the PTT key and it will stay on the scanned channel and
quit scan function.
Or press " " key once, the last selection will be confirmed and
enter into next function selection.

Key Lock

Press and hold " " key for 1.5 seconds, LCD displays the
icon.
All keys are locked except the PTT and "
To unlock, press and hold "
In FM broadcast mode, this key works as toggle switch between
the frequency setting
" keys.
" key for 1.5 seconds again.
and the volume setting, too.
25