Chauvet DJ Intimidator Spot 100 IRC Guía De Referencia Rápida página 4

Intimidator™ Spot 100 IRC QRG
Overview
(Back)
AC Power
Fuse
Replacement
Infrared
Remote
Control (IRC-6)
Safety Loop
DMX Out
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The Intimidator™ Spot 100 IRC is fully compatible with the IRC-6 from
Chauvet DJ. For more information on the IRC-6 or to download
instructions, go to www.chauvetlighting.com.
DMX In
4
Fuse Holder
Power In
Back Panel View
EN