Napa CARLYLE TW1 Manual Del Usuario página 6

OPERATION (CONT.)
4. The TW1 should be operated with two hands at the
center of the handle. There should be care taken when
used on uneven surfaces and footing should be firm and
stable parallel with the tool. Hand placement is critical in
insuring that accurate torque is applied to the chosen
fastener. The image to the right indicates proper hand
placement on the grip. When tightening a fastener you
should ratchet the wrench to a proper height that is easily
accessible and force should be applied in a downward
motion until the wrench "breaks back" indicating
specified torque has been reached.
MAINTENANCE
2. Lower Hinge
There are three points on the TW1 that should be lubricated regularly, or after each use to extend the longevity of the
tool. Check with your local hardware store for tool lubricants such as light machine oil for use with this wrench. Each
of the three points of lubrication are shown in the above image.
TW1
1. Top Hinge
6
3. Adjustment Rod
Rev. 10/25/12