Alarm; Setting The Alarm Time; Being Awakened - ADE CK 1720 Instrucciones De Operación

Alarm

Setting the alarm time

If there is a delay of more than
approx. 20 seconds between two
pushes of a button, the setting
process is automatically terminated.
1. Slide the alarm slide switch upwards to ON.
A dot will be displayed next to
2. Press the SET button.
3. Select the desired alarm hour by turning
SET (+/–).
4. Press the SET button again.
5. Select the desired alarm minute by turning
SET (+/–).

Being awakened

At the set time you will be woken by an alarm
signal, which will become more intense as the
waking time increases.
.
45