Storing The Machine; Maintenance; Table Of Maintenance Periodicity - Solo 501-4T Manual Del Usario

Storage
PRECAUTION:
. Each autumn or before storing your machine for a longer period of
time, carefully follow the following instructions to guarantee that your
material will be ready to use if needed:
1 – Clean the machine (page 17)
2 – Clean the air filter (page 14)
3 – Empty the petrol tank (page 15)
4 – Change the engine oil (page 16)
Danger
- Stop the engine before all maintenance work.
- Disconnect the spark plug lead, to avoid any risk of the machine accidentally starting.
Important:
Only use original spare parts from the
Using other parts may lead to deterioration of your machine.
FREQUENCY OF MAINTENANCE
PART
Engine oil
Air filter
Start cord
Engine cooling flanges
Spark plug
Spark arrester
Idle running
Fuel tank filter
Fuel tank
Fuel pipe
Engine function
Machine exterior
Throttle lever function
Electric cables
Control cable
All the nuts and bolts
Gear housing
Coupling mechanism*
Contact your distributor
*

STORING THE MACHINE

MAINTENANCE

manufacturer.

Table of maintenance periodicity

Each
use 10 hours
replace
clean
inspect
inspect
inspect
inspect
inspect
inspect
clean
- 34 -
5 - Give all moving parts a light coat of oil.
6 - Oil the accelerator cable and all the visible moving parts.
7 - Inspect the spark plug, clean it and change it if necessary.
8 - Gently pull the start cord two or three times to ensure that the insi-
de of the cylinder is well lubricated.
9 - Inspect and, if necessary, change all defective parts.
10- Store your machine in a clean and dry area and cover it with an
awning.
Every Every 3 months Every 6 months
or 25 hours
empty
clean
inspect
NO MAINTENANCE
Every 40 hours of operation
Every year Every 2 years or
or 50 hours or 100 hours
clean/adjust
clean
inspect/adjust
inspect
clean
adjust
GB
after 3 hours
replace
inspect