Introduction; Specifications; General Information - Woods BATWING BW15.50E Manual Del Operador

Cutting Height (Varies with tire selection) . . . . . . . . . . . . . . . . . . . . . . . . . . .25 mm - 380 mm
Cutting Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5 m
Overall Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.8 m
Transport Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.4 m
Transport Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.1 - 2.7 m
Tractor HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Tractor Min. PTO hp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Tractor PTO rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .540/1000
Blade Spindle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Blade Overlap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 mm
Number of Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Blade Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Left Spindle: CW; Right & Center Spindles: CCW
Blade Speed (meters per minute) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4572/4877
Wing Driveline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat 4
CV Driveline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat 6
Side Frame Thickness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.4 mm
Wheel Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 737 mm Max
Torsion Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Slip Clutch
WARNING
 Some illustrations in this manual show the equipment with
safety shields removed to provide a better view. This equipment
should never be operated with any necessary safety shielding
removed.
The purpose of this manual is to assist you in operating and main-
taining your cutter. Read it carefully. It furnishes information and
instructions that will help you achieve years of dependable perfor-
mance. These instructions have been compiled from extensive field

4 Introduction

SPECIFICATIONS

WEIGHT SPECIFICATIONS
Model No.
(approximate kg.)
BW15.50E / 15.50QE
BW15.60E / 15.60QE
BW15.70E / 15.70QE
BW10.50E / BW10.50QE
BW10.60E / BW10.60QE
BW10.70E / BW10.70QE

GENERAL INFORMATION

BW15.50E / BW15.50QE
BW15.60E / BW15.60QE
BW15.70E / BW15.70QE
Weight Tongue Weight
(approximate kg.)
1970 545
2020 612
2195 667
1875 545
1948 612
2116 667
experience and engineering data. Some information may be general
in nature due to unknown and varying operating conditions. However,
through experience and these instructions, you should be able to
develop procedures suitable to your particular situation.
The illustrations and data used in this manual were current at the
time of printing but, due to possible inline production changes, your
machine may vary slightly in detail. We reserve the right to redesign
and change the machines as may be necessary without notification.
Throughout this manual, references are made to right and left direc-
tions. These are determined by standing behind the equipment fac-
ing the direction of forward travel. Blade rotation is clockwise (left
wing) and anticlockwise (right wing and centre section) as viewed
from the top of the cutter.
BW10.50E / BW10.50QE
BW10.60E / BW10.60QE
BW10.70E / BW10.70QE
25 mm - 380 mm
3.2 m
3.5 m
2.3 m
2.1 - 2.7 m
200
45
540/1000
2
152 mm
4
4572/4877
Cat 4
Cat 6
6.4 mm
Slip Clutch
MAN1246 (04/10/2018)