Installation - aldes C.AXPIR Instrucción De Instalación Y De Mantenimiento

2. INSTALLATION

2.1. Unit wall fixing
The equipment must be installed in a ventilated location that is easy to access, far from any heat source and near a power socket.
It should be fixed to the wall using the bracket supplied on a wall capable of supporting the weight of the machine. The unit should be fixed at least
60 cm above the floor so that the dust tank can be emptied. It is important to leave enough space either side of the unit to facilitate its fitting and
maintenance.
2018-07_11070608-A_Notice_Installation_C_Axpir.indd 15
Recommended: 6 screws M6x30 mm (not
supplied). Abide by the drilling template.
15
EN
24/01/2019 17:57