Publicidad
Idiomas disponibles
Idiomas disponibles
2.2. Connection to the suction ductwork
• The equipment supplied to you is planned for cyclonic suction by default.
• In this case, only the top air inlets must be used.
• Both inlets can be used to form your suction ductwork but they cannot be used simultaneously.
Suction
Réseau
d'aspiration
ductwork
Plug
Bouchon
Caution : The unused air inlets must be plugged without fail using the plugs (see components) supplied. These plugs can only be
inserted in one direction, as shown above. A notch guides the correct insertion of the plug into the duct. The central bar on the outside
section of the plug must be vertical when the plug is inserted correctly.
The bottom air inlets are only used with the dustbag option (not supplied).
3 filtering dustbags + fixing system
Ref. 11071170
Set of 3 spare bags
Ref. 10071171
2018-07_11070608-A_Notice_Installation_C_Axpir.indd 16
Suction
Réseau
d'aspiration
ductwork
Plug
Bouchon
16
24/01/2019 17:57
Publicidad
Capítulos
