General Information; Explanation Of Symbols - Hazet-Werk 9033-4 Manual De Instrucciones

1. General information

• Please make sure that the user of this tool
carefully reads these operating instructions
and fully understands all information given
before it is used.
• These operating instructions contain impor-
tant information that is necessary for the
safe and trouble-free operation of your
HAZET tool.
• For intended use of the tool, it is essential
that all safety and other information in these
operating instructions is adhered to.
• For this reason, always keep these opera-
ting instructions together with your HAZET
tool.
• This tool has been designed exclusively for
specific applications. HAZET emphasises
that any modification to the tool and/or use
in a way that does not correspond to its
intended application is strictly forbidden.
• HAZET will not be liable for any injuries or
damages caused by improper or inappropri-
ate application which is not in accordance
with regulations or a disregard of the safety
instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci-
dents in the application area of this tool
must be observed and respected.
Always wear personal protective clothing and safety equipment!
1
For your Information

2. Explanation of symbols

Attention: Pay strict attention to
these symbols!
Wear hearing protection!
READ THE OPERATING
INSTRUCTIONS!
The owner is obliged to observe the
operating instructions and instruct
all users of this tool according to the
operating instructions.
NOTE!
This symbol indicates advice that is
helpful when using the tool.
WARNING!
This symbol indicates important speci­
fications, dangerous conditions, safety
risks and safety advice.
ATTENTION!
This symbol indicates advice which,
if disregarded, results in damage,
malfunction and/or functional failure of
the tool.
QUALIFIED PERSONNEL!
The tool may be used by qualified per­
sonnel only. Handling by non­qualified
people may lead to injuries to persons or
damage to the tool or the workpiece.
11