1. Owner's
responsibility
• The tool was developed and manufactured
according to the technical norms and stan-
dards valid at the time and is considered to
be operationally reliable. Nevertheless, the
tool may present a danger when it is used
in an incorrect or inappropriate way by
non-qualified personnel. Please make sure
that any person using this tool or carrying
out maintenance work carefully reads and
fully understands these operating instruc-
tions before using the tool.
• Any modification of the tool is strictly for-
bidden.
• All safety, warning and operating instruc-
tions on the tool must be kept legible at all
times. All damaged labels or stickers must
be replaced immediately.
• All specified set values or ranges must be
observed.
• Always keep the operating instructions
close to the tool.
• The tool must only be used if it is in good
working condition.
• All safety equipment must always be within
easy reach and should be checked regular-
ly.
12
2
For your safety
accordance with the information in the ope-
rating instructions. In addition to the safety
advice in these operating instructions, the
general safety regulations, regulations for
the prevention of accidents and regulations
for environmental protection valid for this
tool's application area must be observed and
respected.
Use and maintenance of the tool must always
comply with relevant local and national regu-
lations.
The HAZET pneumatic belt sander is suitable
for processing fillet welds, for sanding down
areas that are difficult to access, for sanding
spot welds and for deburring during machi-
ne construction.
• Incorrect use of the HAZET pneumatic belt
sander or use that fails to comply with the
safety instructions can result in serious
injury or death.
• Any deviation from the intended use
and/or any misapplication of the tools
is not permitted and will be considered
improper use.
• Any claims against the manufacturer and/
or its authorised agents because of damage
caused by improper use of the devices are
void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the owner.
Wear hearing protection!
2. Intended Use
Operational reliability is only guaran-
teed if the tool is used as intended in