Professional Installation Steps - WINK leakSMART Manual De Instalación Y Operación

leakSMART

Professional Installation Steps

The leakSMART
ball valve that connects directly to a home's main water supply. Professional
installation is strongly recommended to ensure proper operation and
reliable water damage prevention.
Please note:
9
™
Valve is a patent-pending, wireless, motorized brass water
™
• The leakSMART
existing main water shutoff
• To avoid any injury, never place your fingers inside the valve
• Do not grip plastic motor drive for leverage when installing the valve
• Do not install on fire suppression systems or fire sprinkler water lines
1.
Ensure that you have all necessary leakSMART
• leakSMART Valve (3/4" FIP x 3/4" MIP)
™
• AC power adapter with 10 ft. cord
• 4 AA Alkaline batteries (not provided)
2.
To protect the valve cover from possible damage, remove it
by sliding it away from the valve, and keep it off until you've
completed installation
3.
Shut off the main water supply valve
Valve may only be installed in homes with an
™
Valve components:
™