WINK leakSMART Manual De Instalación Y Operación página 6

leakSMART
™
Homeowner System Setup
2.
Pair each leakSMART
• Your sensor provides an audible water detection alarm even without connection
to your smart home system hub — but pairing means the system will signal your
leakSMART
notifications, preventing water damage within seconds
• Install 3 AAA alkaline batteries (provided), and the sensor's blue lights will blink
quickly to indicate that it's ready to pair
• Use your smart device to add the sensor to your smart home system app —
just scan the barcode on your leakSMART
instructions. You can also manually search for leakSMART
When pairing is successful, the sensor's light will blink slowly five times,
}
and you'll hear slow beeping for five seconds
• Simply place the leakSMART
Sensors must be placed on the floor, completely flat, with the leakSMART
}
Sensor logo facing the ceiling
We recommend placing sensors near appliances and plumbing fixtures
}
Our waterproof sensors are designed to fit into tight spaces, without shifting
}
or sliding, so it's easy to monitor any area
Additional sensors may be purchased separately for whole-home monitoring
}
3.
Contact a licensed plumber for professional installation of your leakSMART
• For fast, easy installation, provide your plumber with the details on pages 9–11
Sensor with your smart home system
™
Valve to automatically shut off your water and send you instant
™
Sensor anywhere you need to detect moisture
™
package and follow the on-screen
™
in your system's app
™
™
Valve
™
4