Troubleshooting - WINK leakSMART Manual De Instalación Y Operación

leakSMART

Troubleshooting

Problem
Status lights
do not come
on
No water
comes out
of the faucet
leakSMART
Valve does
not operate
leakSMART
Valve does
not operate
with your
smart home
system
Valve
™
What to Check
• Make sure there is power to the outlet
• Unplug AC power adapter cord from valve cover and plug back in
• If AC adapter extension wire was used, unplug both ends and reconnect
• Replace batteries
• Check that your leakSMART
on your Valve
• Make sure the main water supply valve is open
• Replace batteries
™
• Check that the unit is powered from the AC power adapter
• Check or replace batteries
• Check your smart home system app to ensure the valve is connected
™
• Check Internet connection to your hub
• Press reset button on your hub
• You may need to install additional devices to increase the range of your
hub (sold separately)
Valve is open by pressing the "Open" button
™
6