Uline H-7978 Manual De Instrucciones página 3

This label printer is designed for real-time and batch
label printing, which is applicable in the field of
transportation, logistics, post, retail sale, etc. The printer
can be connected to other equipment with various
interface cards, including parallel, serial, USB and LAN.
Supports different paper media, including thermal
paper roll, thermal label paper and label stock.
The printer provides direct thermal printing at selectable
printing speeds of 2.0, 3.0, 4.0 and 5.0 inches per
second. It accepts roll feed, die-cut and fan-fold labels.
All common barcode formats are available. Font and
bar codes can be printed in four directions and in 1-10
times enlargement size.
WARNING! Read the following notes and
warnings before using the printer.
CAUTION! The printhead is a heated part. Do
not touch the printhead or other parts around it
during and after the printing process.
CAUTION! Do not touch the printhead and
plug-in parts to avoid printhead damage.
CAUTION! Do not touch the paper tear-off knife,
as this may lead to serious injury.
• Do not touch the printhead with anything.
• Do not touch cutter blade.
• Do not bend the power cord excessively or place
any heavy objects on it.
WARNING! Do not use the printer when it is out
of order. This can cause a fire or electrocution.
SETTING UP THE PRINTER
UNPACKING
Unpack the printer package and inspect all parts
according to the packing list. If any parts are missing,
contact Uline Customer Service at 1-800-295-5510.
PAGE 3 OF 24
OVERVIEW OF CONTROLS CONTINUED
PRIMARY FUNCTIONS
• Supports continuous paper roll, non-continuous
label roll and non-continuous adhesive paper.
• Supports thermal paper roll, thermal paper and
label stock.
• Supports print media width from 16 – 82 mm.
• Auto paper adjusting function.
• Auto temperature control for durable printing.
• Module design for different applications.
SAFETY
• When connecting or disconnecting the plug, always
hold the plug, but not the cord.
• Keep the desiccant out of the reach of children.
• Use only approved accessories.
CAUTION! Device should only be serviced by
qualified personnel.
• Install the printer on a firm, level surface to minimize
vibration while printing.
• Do not let water or other substances into the printer.
• Do not connect a telephone line into the peripheral
drive connector.
• Unplug the printer from the power outlet if printer is
not in use for a long period of time.
SETUP
LABEL ROLL INSTALLATION
1. Press the top cover
open button to open
the top cover.
(See Figure 1)
Figure 1
Button
0319 IH-7978