Uline H-7978 Manual De Instrucciones página 5

SELF-TEST
To start the printer self-test, follow these steps:
1. Turn off the printer power.
SELF-TEST SAMPLE PAGE
PAGE 5 OF 24
POWER ON UTILITIES
SELF-TEST ............................................................................................. Self-test Mode
VERSION: V1, 1 (2013.3.1) ..................................... Firmware Version
INTERFACE: USB and Serial .................................. Interface Type
SERIAL PORT: SERIAL 9600, N, 8, 1 ....................... Serial Communication Parameters
ETHERNET: 10M/100M........................................... LAN Communication Parameters
PROTOCOLS: TCP/IP
IP ADDR: 192.168.1.223
MAC ADDR: 00-28-9E-E6-15-D7
NETMASK: 255.255.255.0
GATEWAY: 192.168.1.1
SPEED: 5 ............................................................... Print Speed
DENSITY: 7 ............................................................ Print Darkness
SIZE: 57 mm, 40 mm ............................................ Paper Width
GAP: 2 mm, 0 mm ............................................... Gap Distance
CODE PAGE: 437.................................................. Code Page
MILEAGE (m): 44.488625 ..................................... Printed Mileage (meter)
REFERENCE: 0 mm, 0 mm .................................... Reference Offset
DIRECTION: 0, 0 ................................................... Print Direction
SHIFT: 0 ................................................................ Label Print Offset
OFFSET: 0 ............................................................. Paper Tear-Off Offset Printer Functions
SET PEEL: OFF ....................................................... Peel Off Mode
SET TEAR: ON ........................................................ Tear-Off Mode
SET HEAD: ON ...................................................... Cover Opening Sensor
SET PRINTKEY: OFF ................................................ Press and Print Function
SET REPRINT, OFF .................................................. Auto Reprint Function
SET KEY1 (FEED), ON ............................................. Feed Button Function
SET KEY (PAUSE), ON ............................................. Pause Button Function
TAIWANESE BIG5, TST24, BF2 ................................. Taiwanese
CHINESE GB2312: TSS24.BF2 ................................ Chinese
KOREAN KSC5601: K ............................................ Korean
2 D BARCODE: QRCODE, Datamatrix, PDF417
* * * * * * * * * * * * * * * * * * * * * * * * * * * *
DRAM FILE: 0
FLASH FILE: 0
SECTOR SIZE: 4
PHYSICAL DRAM: 2048
AVAILABLE DRAM: 1024
PHYSICAL FLASH 2048
AVAILABLE FLASH 1024
* * * * * * * * * * * * * * * * * * * * * * * * * * * *
2. Make sure the paper roll is installed correctly and
the printer top cover is closed.
3. Press the feed button and turn on the power
simultaneously. When the self-test paper comes out,
release the feed button.
FILE (S)
Number of Downloaded Files
FILE (S)
KB
KBYTES
KBYTES FREE
Physical and Available
Memory Space
KBYTES
KBYTES FREE
Button Function
0319 IH-7978