Getting Started; Description; Specifications; Dimensions - Franklin Electric Inline Control El Manual Del Propietario

GETTING STARTED

This owner's manual provides you with the information required
to safely own and operate your flow control switch. Retain these
instructions for future reference.
This flow control switch is of the highest quality workmanship and
material. It has been engineered to give you long and reliable service.
Our products are carefully tested, inspected, and packaged, ensuring
safe delivery and operation.
Inspect Your Shipment
Please examine your product carefully to ensure that no damage
occurred during shipment. If damage is evident, please contact the
place of purchase or report this immediately to your shipping carrier.
They will assist you in replacement or repair, if required. In the case
of shipping damage, the carrier is fully responsible for the product's
safe arrival. Any claim for damage to the shipment, either visible or
concealed, must be made through the shipping carrier.
Package Includes:
• Pump control device
• Booster pump (in certain models)
• Installation manual
DANGER
Do not use to pump flammable or explosive
fluids such as gasoline, fuel, oil, kerosene, etc. Do not use in explosive
atmospheres. Pump should only be used with liquids compatible with
pump component materials.
Hazardous Pressure
Booster pumps can produce significant water
pressure within a plumbing system. This
could cause damage to pipes and/or fixtures.
To prevent personal or property damage,
install a pressure relief valve capable of
conveying entire water volume to a drain. Relieve system pressure
before disassembling the device.
4

DESCRIPTION

This device activates your pump as water is used in the building
based upon the pressure setting. Once the flow stops, the pump
also turns off. This will protect your pump in case of a water shortage
or dry run event. This product uses either 115 volts or 230 volts
and can be installed on any surface-mounted pump. When using
this device, a pressure tank is not required, but can be used as an
optional accessory.

SPECIFICATIONS

Description
Name (on label)
Enclosure Rating NEMA
Max. Motor Size
Weight
Voltage
Max. Current
Min. Flow
Electrical Connection FNPT
Plumbing Connection MNPT
Max. Operating Pressure
Max. Operating Temperature
Protection of Internal Components
Impulse Voltage
Nominal Fluid Temperature

DIMENSIONS

231 mm (9.1")
297 mm (11.7")
Inline Control
InlineCTL
Type 4
1.0 hp / 3 hp 0.75 kW / 2.2 kW
5 lbs.
115/230
20 A
0.26 gpm
1/2"
1-1/4"
174 psi (12 bar)
131 °F (55 °C)
Pollution Degree 2
2.5 kV
68 °F (20 °C)
156 mm (6.1")
216 mm (8.5")