Battery Installation - ION iPTUSB Manual De Inicio Rápido Del Usuario

1. Make sure all items listed on the front of
this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET
BEFORE USING THE PRODUCT.
3. Study this setup diagram.
Note: This turntable can be used as a
standalone unit, as well as with the items
listed in the quick setup diagram.
4. Make sure all devices are turned off and all
faders and gain knobs are set to "zero"
5. Connect all stereo input sources as
indicated in the diagram.
6. Connect the stereo output devices to power
amplifier(s), tape decks, and/or other audio
sources.
7. Plug all devices into power.
QUICK SETUP GUIDE (ENGLISH)
DJ HEADPHONE

BATTERY INSTALLATION

This product can be powered by 6 "D" Cell batteries. They should be loaded as
show above, with the positive end toward the handle.
POWER
AUDIO RECORDER
MIXER
NORMAL FLANGER AUTOCUT LOPASS
L R RATE
RATE
FILTERS AUTOPAN FILTERED VARI-CUT
8. Switch everything on in the following order.
Turntable
•
Mixer (not included)
•
last, any amplifiers or output devices
•
(not included)
9. When turning off, always reverse this
operation by,
turning off amplifiers (not included)
•
mixer (not included)
•
Turntable
•
10. Go to http://www.ion-audio.com
product registration.
More information about this product may be
found at http://www.ion-audio.com
for