Programming Menu - Constant Functioning; Functioning Capacity; Functioning Period - Aqua HC 997 Manual De Instrucciones

HC997 – MOD. B
Digital multifunction solenoid metering pump
4.3 P
ROGRAMMING MENU
4.3.1

Functioning Capacity

4.3.2

Functioning Period

ADSP9000030
– C
ONSTANT FUNCTIONING
The pump doses at a constant flow rate set in different unit of measurements (%, SPM,
ml/min, L/h) – see the setting menu.
When the pump is powered, it performs a continuous dosing at the programmed flow
rate.
Press the
Press the key to go at the previous menu.
The pump doses for programmed time and flow rate.
In this functioning mode there are two parameter to set:
Period (working time)
Setting from 1 to 240 minutes at steps of 1 minute.
Functioning that can be in different units of measurement (%, SPM, ml/min,
L/h) – see the settings menu.
Example: Period = 10 minutes
The pump doses per 10 minutes at the 100% of the maximum flow rate.
Press the
Press the key to go at the previous menu.
Press the
menu.
Press the key to choice the entry desired.
keys to set the desired values.
Functioning = 100%
keys to set the desired values.
13/10/09
CONSTANT FUNCTIONING
keys to scroll the entries of the
ENGLISH
29/88