HC997 – MOD. B
Digital multifunction solenoid metering pump
4.4 P
ROGRAMMING MENU
4.4.1
Proportional functioning by external pulses
4.4.2
Proportional functioning by external pulses 1xN
ADSP9000030
– P
ROPORTIONAL FUNCTIONING
In this functioning mode there are two parameters to set:
Number of strokes to perform.
Setting from 0 to 250.
Frequency of the strokes per minute (Str/m).
Setting from 1 to 150 or 180 (depends on the model).
Every time the pump receives a pulse from the water meter it perform the desired
strokes at the programmed frequency.
Example 1xN = 1x15
The pumps gives 15 strokes at 60SPM frequency every time it receives a pulse from the
water meter.
Press the
Press the
key to go at the previous menu.
PROPORTIONAL FUNCTIONING BY EXTERNAL PULSES
Press the
Press the
key to select the desired entry.
Press the
Press the
key to select the desired entry.
Str/m = 60
keys to set the desired values.
13/10/09
keys to scroll the menu entries.
keys to scroll the menu entries.
ENGLISH
31/88