Settings Menu - Date And Clock; Settings Menu - Calibration; Settings Menu - Units Of Measurement - Aqua HC 997 Manual De Instrucciones

HC997 – MOD. B
Digital multifunction solenoid metering pump
4.6.2 Settings menu – Date and clock
4.6.3 Settings menu – Calibration
4.6.4 Settings menu – Units of measurement
ADSP9000030
This menu allow to set the date and clock..
Press the
Press the key to move the cursor on the next field, the value to modify is blinking.
Press the key to go back at the previous menu or move the cursor at the
previous field.
This menu allows to set the flow rate in mL of the pump in
100 strokes.
To perform the calibration following this procedure:
8. Priming the pump, the chemical has to go out from the
delivery.
9. Positioning a graduate container (at least 250 mL) on
the suction of the pump.
10. Save the quantity of the chemical inside the
container (L1).
11. Enter in the calibration menu and activate the pump.
12. A countdown will start.
13. When the pump stops, save the remaining quantity
of chemical inside the container (L2).
14. Press the
that is the difference between L1- L2 and then press
the key to confirm.
keys to set the desired values.
keys to set the mL drawn
This menu allows to set the units of measurement of the
pump's flow rate.
The units of measure L/h e mL/min are active only after the
calibration.
Press the
Press the key to select the desired entry.
13/10/09
SETTINGS AND CALIBRATION
keys to scroll the menu entries..
ENGLISH
39/88