Danger Of Injury; Replacement Parts - Super Ego SEH003400 Manual De Instrucciones

Material Use
Metal,
Grinding
stone
Metal Roughing
Separating
(only with
Stone a special
guiding
sledge!)
Care and maintenance

1. DANGER OF INJURY

Before all care and maintenance work:
− Turn the machine off.
− Pull out the power plug
− Wait until the machine is still.
The machine is basically maintenance free. Allow all
servicing, which is not described in this user manual,
to be performed by a professional.
− Keep the machine and the air vents clean.
− Only keep the machine in a dry and frost-
free room.
2. CLEANING
− Clean the machine regularly, best if after
each use. Remove dust, shaving, wood
splinters, etc.
− Clean the machine with a wet cloth. Do not
use cleaning agents or solutions, these can
corrode the plastic parts of the machine.
− Make sure that no water can reach the inside
of the machine.

3. REPLACEMENT PARTS

− Danger of accident!
− Parts which
approved by the manufacturer can damage
the machine and can lead to serious injuries.
− Only use original parts as replacement
parts, especially with safety mechanisms and
cutting tools.
4. CHANGING OUT CARBON BRUSHES
− We recommend
electrician when changing out and servicing
the carbon brushes.
Protección del medio ambiente y eliminación
Packaging materials are raw materials and can be
re-used. Separate the different packaging materials
and take them to a designated waste disposal
facility. More information can be obtained from the
appropriate authorities.
Old machines do not belong in your household
garbage! Dispose of old machines appropriately. We
16
Rotation
Tool
speed
Grinding
High to max
disc
Roughing
Max
disc
Separating
disc and
Max
guiding
sledge
were not reviewed
that you consult
are all responsible for the environment. The local
authorities can inform you of collection locations
and working hours.
When its useful life is over, do not dipose
or the machine into the domestic waste,
please send it to auhorised places for
recycling.
Technical data
Operating power
Capacity
Idle rotation speed
Grinding discs
Perimeter speed
Grinding spindle thread
Weight (excluding accessories):
Protection class:
and
an
ENGLISH
230V-50Hz.
780 W.
11.000 r.p.m.
115 mm.
80 m/s.
M14
1,95 kg.