Tips And Recommendations; Questions About The Sunis Indoor Wirefree™ Rts - SOMFY Sunis indoor WireFree RTS Guia De Instalacion

Installation guide

7. Tips and recommendations

7.1. Questions about the Sunis Indoor WireFree™ RTS?
Observations
The end-product
does not react to
sunlight.
The end-product
reacts too often.
The end-product
reacts abnormally.
12
Possible causes
The sensor is off.
The sensor is not
programmed.
The sunlight
threshold is not set
correctly.
The battery is
weak.
The sensor is dirty. Clean the sensor.
The sensor is
poorly positioned.
The sensor is in
"Demonstration
mode" or
"Simulation mode".
A light source is
interfering with the
sensor.
Sunis indoor WireFree™ RTS
Solutions
Slide the (OFF/
switch to
See the section "Adding/
Deleting a Sunis Indoor
WireFree™ RTS".
Set the sensitivity level
again.
Replace it.
Reposition the sensor.
Deactivate the
"Demonstration mode" or
sun "Simulation mode".
Move the light source.
Copyright © 2010 Somfy SAS. All rights reserved.
) selector
.