Transferring Music from the Digital
Music Service (such as Napster or
eMusic)
1. Using your computer, open your preferred
PC music management client.
2. Download the selected song to your library.
3. M ake sure the microSD
properly into the headset.
4. U se the USB adapter cable to connect the
handset to the PC. When you try to connect
handset on your PC, the handset displays
"Connecting as Music Sync...".
5. O nce the USB connection has been
established, the handset displays
"Connected as Music Sync Mode. Do
not disconnect during transfer." and the
computer screen then shows the CF360
device. If the detection does not occur, skip
to Changing USB Connection Settings
section on page 45.
6. F ollow the instruction in the program to
transfer music to your handset.
Note
n
If you have a USB hub, connect the handset
directly to your computer rather than through
the hub.
Transferring Music using Windows
Media Player
1. O pen Windows Media
2. U se the USB adapter cable to connect the
card is inserted
TM
3. O nce the USB connection has been
n
If you have a USB hub, connect the handset
directly to your computer rather than through
the hub.
4. F rom within the Windows Media
AT&T Music
Player on your
®
computer (version 10.0 or higher).
handset to the PC. When you try to connect
handset on your PC, the handset displays
"Connecting as Music Sync...".
established, the handset displays
"Connected as Music Sync Mode. Do
not disconnect during transfer." and the
computer screen then shows the CF360
device. If the detection does not occur, skip
to Changing USB Connection Settings
section on page 45.
Note
Player application, click on the Sync tab.
Previously downloaded songs are then
listed on the left side of the application.
®
43