Playing Records - Classic Phono TT-34 Manual De Usuario

PLAYING RECORDS

This system includes a full-size, 3-speed, belt-drive turntable. You can play 33, 45, and
78RPM records.
1) Press the POWER button to turn on the unit.
2) Make sure that you have removed the stylus cover from the stylus and have released
the Tone Arm Lock that secured the tone arm to the tone arm rest.
3) Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78RPM. If you
are playing 45RPM singles, place the 45RPM adapter on the center spindle.
4) Place your record on the center spindle.
5) Raise the CUE lever to lift the tone arm off its rest. Move the tone arm to the edge of
the record. The turntable starts automatically. Use the CUE lever to gently lower the
tone arm onto the record.
6) When the tone arm reaches the end of the record it automatically returns to the tone
arm rest and the record player stops.
7) To turn the system "Off", press and hold the POWER button 2 seconds.
NOTE: Do not turn or stop the turntable manually, Moving or jarring the Turntable without
securing the Tone Arm clamp could result in damage to the Tone Arm.
IMPORTANT
• TO PROTECT THE TURNTABLE FROM DAMAGE DURING TRANSPORTATION, A
SILVER TRANSIT SCREW IS LOCATED AT THE UPPER RIGHT OF THE
TURNTABLE PLATFORM.
• BEFORE PLAYING, PLEASE USE A SCREWDRIVER TO TURN THE TRANSIT
SCREW IN CLOCKWISE DIRECTION (SCREW GOING DOWN) COMPLETELY TO
UNLOCK THE TURNTABLE
• TO LOCK THE TURNTABLE AGAIN FOR TRANSPOTATION, PLEASE TURN THE
SCREW IN COUNTER-CLOCKWISE DIRECTION.