Solar 4001 Manual Del Proprietário página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Control Cabinet Top
The top panel of the Control Cabinet features important controls and indicators related to Recharging the Unit and
the Jump Starting function.
MASTER ON/OFF SWITCH
This control turns unit output on or off.
BATTERY TYPE SETTING
This setting is used to optimize the charging system based on the type of batteries installed.
BATTERY STATUS DISPLAY
Depressing the DISPLAY ON Switch will activate the display and provide the voltage of the onboard battery
bank. The voltage displayed will reflect the voltage mode in which the unit is configured. If, when the Switch
is depressed (and the unit is not connected to a vehicle), the display voltage is less than 12.5V, the unit
should be recharged. If, when the Switch is depressed (and the unit is not connected to a vehicle), the display
voltage is less than 11.8V, the display will alternate between the battery voltage and "LO" – the unit should be
recharged immediately.
BOOST MODE TIMER
This control is used to lengthen or shorten the duration of the BOOST MODE ENGAGED function.
Output Controls
There are several Quick Connect housings used to control and/or configure the output of Model No. 4001.
They are color-coded and will only mate with like-colored connectors.
12V Quick Connect – Red
This connector is used to engage the 12/24V configured 4001 in 12V mode. In this case, the Voltage Selection
Quick Connect is mated to this connector to engage the unit in 12V mode.
24V Quick Connect – Red
This connector is used to engage the 12/24V configured 4001 in 24V mode. In this case, the Voltage Selection
Quick Connect is mated to this connector to engage the unit in 24V mode.
Voltage Selection Quick Connect – Red
This connector is used to determine the output voltage of the 12/24V configured 4001 or to place the unit
into Charging Mode. To select an output voltage, this connector is mated to either the 12V Quick Connect
(12V Mode) of the 24V Quick Connect (24V Mode). To select Charging Mode, this connector is mated to the
Charging Quick Connect.
5

Publicidad

Tabla de contenido
loading

Productos relacionados para Solar 4001

Tabla de contenido