Configuring The Measured Value Memory (Memory Set) - WEBTEC HPM540 Manual De Instrucciones

Configuring the measured value memory
7. Configuring the measured value memory
(MEMORY SET)
The following settings will be undertaken:
• Delete measured value memory
• Configure data format of the measured values
• Configure recording intervals
Menu Setting/
pre-selection
DELETE YES, NO
MEMORY:
DATA ACT
FORMAT:
MIN-MAX
REC CON- REC RATE
FIG:
2.000 PTS
REC RATE ms, s, h
UNIT:
REC Number
RATE:
When defining ACT values, it is possible that important measure-
ment values will not be saved if the selected recording interval is
too great.
100
Example Notes
YES Delete the measured value
memory
ACT Data format of the meas-
ured values
ACT =
Save actual values
MIN-MAX =
Save MIN/MAX values
2 000 PTS REC RATE =
Setting an individual re-
cording interval
2.000 PTS =
Dividing the recording time
in 2 000 recording intervals
ms Pre-selecting time unit
(recording interval)
20 Setting 20 ms
V2.0/02.11