TROUBLESHOOTING
If the unit does n ot operate after taking these measures, contact the nearest dealer.
PROBLEM
The unit cannot power on
Stimulation weak or cannot feel any
stimulation
Stimulation is uncomfortable
62
EN
POSSIBLE CAUSES
Are the batteries exhausted?
Are the batteries installed correctly?
Electrodes are dried out or dirty.
Electrodes do not stick to skin well.
Lead wire is old, worn, or damaged.
Intensity is too high.
Electrodes are too close together.
Electrode active area size is too small.
Is the device being operated according to
the manual?
POSSIBLE SOLUTION
Replace the batteries.
Insert the batteries observing polarity.
Replace with new electrodes.
Replace with new electrodes.
Replace with new lead wire.
Decrease intensity.
Reposition electrodes to be at least 2 inches apart.
Replace electrodes with ones that have an dia no less
than 2 in.
Please check the manual before use.