Technical Data - Riester ri-thermo fastPRObe Instrucciones De Uso

probe insert and about 30 seconds is placed next to the Thermometer.
The measurement check time for the water bath testing last approx. 60 seconds.
Attention!
We recommend a technical check in two-year intervals.
7.3 Standard
This thermometer conforms to all of the requirements established in
ASTM Standard E1104
ASTM Standard E1112
DIN EN ISO 80601-2-56
8.

Technical Data

Medical Equipment:
Electrical protection:
Electrical degree of protection:
Operating mode:
Dimensions:
Weight:
Battery
Temperature Measurement
Range:
Ambient Operating
Temperature Range:
Ambient Operating
Air pressure:
Storage and transport
conditions
Storage and transport
Air pressure
Laboratory Accuracy
Water Bath Accuracy (36°C to
42.0°C):
Direct measuring mode Accu-
racy (All measuring points)
Fast measuring mode Accuracy
(All measuring points)
Typical Measurement Times
(After position of the probe)
Probe Cover Material
46
Electronic thermometer
Electrical protection:
Type B
Continuous manual operation
205 x 70 x 70mm
400g with Batteries and Probe cover box
4x AA, LR6 Alkaline 1,5 V or
4x AA Mignon NiMH 1,2 V
34 °C - 43 °C (93,2 °F to 109 °F)
10 °C to 40 °C (50 °F to 104 °F)
at 10% - 85% non-condensing
700 to 1050 hPa
-20 to 55 °C (-4 °F to 131 °F),
at 10 - 95 % non-condensing
700 to 1050 hPa
Direct Measuring Mode ±0.1°C (±0.2°F)
Fast Measuring Mode ±0.3°C (±0.5°F)
± 0,1 °C (± 0,2 °F)
± 0,3 °C (± 0,5 °F)
Direct Measuring Mode
Oral Mode: 60 seconds
Axillary Mode: 60 seconds
Rectal Mode: 60 seconds
Fast Measuring Mode
Oral Mode: 12 seconds
Axillary Mode: 12 seconds
Rectal Mode: 12 seconds
HDPE