Recalling Records; How To Maintain And Store The Unit - VM TensioFlash KD-795 Manual

RECALLING RECORDS

1. Press the MEM button to display the stored results.
Now the LCD displays the amount of results. If no result
stored, LCD will show dashes « - ».
2. The LCD will display the last measurement. Press the
MEM button to review the data in ascending order. The
time and date are stored for all results.
3. Deleting measurements from the memory: press the
MEM key until 0 is displayed on the screen.
4. Press the START button to stop the machine.
42 Visiomed - KD-795 - 032016

HOW TO MAINTAIN AND STORE THE UNIT

1. Use a dry soft cloth to clean
the unit. If necessary, use a
cloth lightly dampened with
tap water.
2. Do not use alcohol, ben-
zene, thinner or other harsh
chemicals to clean the device
or cuff.
3. Before using please wash
your hand. Do not wash or
wet the cuff.
4. Store the unit in places far
from direct sunlight, high
humidity or dust.
5. Fold the pressure cuff and
put the unit into the store
box.
Note: When the unit is not used for a long period, be sure to remove
the batteries. Otherwise, the batteries may leak and damage the unit.
Visiomed - KD-795 - 032016 43