Civic Se 2005 (Only) - Metra INST-7898 Instrucciones De Instalación

1. Unsnap and remove the trim ring
from around floor shifter.
2. Unsnap and remove larger trim
around floor console shifter.
3. Remove (2) Phillips screws from
in between cup holder and shifter.
(Figure A)
4. Unsnap sides of console (2 snaps
per side) and remove with power
outlet assembly.
5. Remove (2) Phillips screws from
under radio assembly, facing up.
(Figure A)
6. Remove (3) screws securing the
climate control pod to the back of
the dash trim bezel and remove the
pod. (Figure B)
Dash Disassembly
Honda Civic SE 2005
7. Remove (4) Phillips screws from
each side securing the factory
radio to the bracket assembly and
remove the radio.
8. Cut and remove all mounting clips
on Radio Housing (a), EXCEPT
clips "B" and "H" (hooks can be
identified by the letter stamped
near each clip). (Figure C)
Continue to kit assembly
®
INST-7898
(only)
(Figure A)
9
"H"
(Figure B) (Figure C)
"B"
"B"
"H"