Instructions Of Use - Powerspot THERMIX Manual Del Usuario

INSTRUCTIONS OF USE

This Kit PowerSpot Thermix includes:
• A Thermix generator
• A double connector
• Two extension-connector cables with inlet for E-27 light bulbs
• Two 9W PowerSpot Air bulb
1. Place the Thermix over a medium
flame. This is: of more or less half the
diameter of the Thermix base. In a few
seconds the fan will start to move. If the
indicated temperature in the thermic la-
bel surpasses 90ºC, it must be removed,
let it cool and repositioned over a small-
er flame. If the flame is too big or too
small, the Thermix could have problems
to start before overheating.
24
2. Although a small flame from a small
alcohol or kerosene burner is enough,
its best performance is obtained from
the flames of a gas burner. In any case,
it is necessary to avoid that the flame ex-
ceeds the diameter of Thermix base or it
will not heat up its base and it could also
burn the plastic handle.