Maintenance; Suggestions - Powerspot THERMIX Manual Del Usuario

MAINTENANCE

If the device is going to be left outside,
place it downward, so strange objects
cannot fall over the fan blades. Before
placing it over a flame, please check that

SUGGESTIONS

Thermix can work perfectly by placing it
over hot surfaces such as a barbecue, a
hot iron, a heater or a vitroceramic hob.
In fact, it requires less heat than the one
from a direct flame given that the heat
will be dissipated regularly on the base
of the device.
Placed over a heater, and as long as the
fan starts to spin, a hot air column will be
spread over the whole room instead of
directly to the ceiling, increasing the effi-
ciency of the heater and contributing to
fuel economy.
nothing is blocking the fan blades from
spinning. To clean, use a soft cloth over
the surface.
Over a vitroceramic hob the device works
amazingly well. Although it seems a non-
sense to use an electric hob to activate
an electric generator, Thermix can heat
a kitchen using this heat source if there
is no other heating device in the room.
If used over a barbecue it is better to
place it over the plate. It will provide sev-
eral square metres of light in the open air
through a simple electric installation, al-
though it is important to avoid oils and
fats which smell, when getting in contact
with the heat sink, will stay on the device
for a long time when using it.
29