Cleaning The Water Tank - TaoTronics TT-AH001 Manual De Usuario

Setting Timer
The timer can be set from 1 – 24 hours. The unit will stop working
once the timer is up.
1. While the unit is working, press the "TIMER" button to enter Timer Setting Mode
2. On the display you will see "01:00". This means the timer is set to 1 hour
3. Keep pressing the "TIMER" button and the number of hours will increase
4. Do not press any button for 3 seconds (with the time icon on the display
flashing), and then the timer will be set to the hour on display
5. Countdown will start once the timer is set
6. When time is up, the unit will automatically turn off
Humidity Level
You can set humidity level from 40 to 95% RH.
1. Press the "HUMIDISTAT" button to enter the setting of constant humidity
2. Keep pressing the button until you find the humidity level you want.
Leave the unit for 3 seconds (with the humidity icon flashing on the
display), then the humidity level will be set.
3. If humidity level of your room is higher than your setting, the humidifier
will turn off automatically
Low Water Protection
When water level drops below minimum, a water level warning icon will
show on the display. When this happens, the unit will automatically turn off
to protect itself.

Cleaning the Water Tank

We recommend cleaning the entire unit once every 2 weeks to prevent
bacteria and stain build up.
1. Make sure the unit is turned off
2. Remove the water tank from the base
3. Clean the tank with clean water and wipe clean the water tank before
putting it back to the base
Cleaning the Base / Transducer / Filter
Please be careful when cleaning the unit. Any water splashing inside the
base may damage the unit.
1. Make sure the unit is turned off
2. Empty the water from the base
3. Use a towel to wipe clean the base. Do not use organic solvent like
alcohol or acetone to clean the base
4. To clean the transducer, pour some white vinegar on the transducer
5. Fill a small amount of warm water and wait for 3 to 5 minutes
6. Clean the transducer by using the included brush
7. Rinse clean the transducer
8. To clean the filter, simply dip the filter in white vinegar for 10 minutes and
rinse clean with water
Caution
• Please do not dismantle the product by yourself, always ask professional
electrician or authorized technician for repairing
• If you smell bad odor or anything unusual, please turn off the unit immediately
• Please do not remove the power plug with wet hands as it may cause
electrical shock
• It is not a toy. Keep away from children
• Do not place this unit on sloping or uneven surface to avoid water
leaking or component damage
• Do not put this unit near any heat source or under direct sunlight
• Keep away from other electric appliances that are prone to humidity damage
• Using the unit in a space larger than 150m³ will reduce its effectiveness
• Regularly clean the unit if it won't be used for a long period; store in a
dry and shady place
• We recommend set the humidity level between 40% and 55%
05/06