Phone locked
Battery strength
Torch ON
Headset connected
GET STARTED...
In order to start using your mobile phone, prepare all elements for installation: phone
device, battery, SIM card, memory micro SD card (if you have one), and a charger.
WARNING: The unit and the accessories can contain small parts. Keep all of the
equipment out of the reach of small children.
The mains adapter is the disconnect device between the product and mains power.
The mains socket outlet must be close to the equipment and easily accessible.
1. Install SIM card
To fully use the services of the mobile phone you have to subscribe to mobile network
services. Then, you will obtain a SIM card with attributed mobile phone number.
WARNING: Do not distort or scratch the SIM card nor let it contact static, dust or
moisture. If it is lost, please contact immediately your network operator for help.
Before SIM card installation, please switch off the mobile phone. The slot for SIM card is
on the back of the mobile phone. Follow the diagram below to install the SIM card. Make
sure that the SIM card's contacts are facing inwards and the cut off corner is pointing
downwards.
2. Install Memory card
If you want to use Multimedia services (Audio/Video player) you will need to obtain a
micro-SD card (or T-FLASH) with additional memory space.
To install micro-SD card, open the back cover to take out the battery, release the card
lock, insert the card into the slot, and restore the lock slot and the battery before
restarting the mobile phone. See the picture for your guidance.
5