TFA 38.2030 Instrucciones Para El Manejo página 6

Ocultar thumbs Ver también para 38.2030:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
TFA_No. 38.2030 Anleitung_04_13
Stop watch
4. For your safety
• This product should only be used as described
within these instructions.
• Unauthorized repairs, modifications, calibrations
or changes to the product are prohibited.
• This product is not be used for medical purpose
or for public information, it is only intended for
home use.
Caution!
Risk of injury!
• Keep this instrument and the battery out of the
reach of children.
• Batteries must not be thrown into a fire, short-
circuited, taken apart or recharged. Risk of
explosion!
• Batteries contain harmful acids. Low batteries
should be changed as soon as possible to prevent
damage caused by leaking.
• Batteries can be fatal if swallowed. If a battery
has been swallowed, get medical assistance
immediately.
• Wear chemical-resistant protective gloves and
safety glasses when handling leaking batteries.
Important information
on product safety!
• Do not place your product near extreme temper-
atures, vibrations or shocks.
• Protect it from moisture.
5. Setting
Changing the mode: (Press MODE button)
• Normal mode – stop watch mode – alarm setting
mode – time setting mode
10
26.04.2013
11:03 Uhr
Stop watch
5.1 Setting of the clock and calendar
• Press the MODE button three times while in nor-
mal mode to enter the time setting mode.
• The indication of the seconds and the day-of-the-
week flash.
• Press the START/STOP button to set the seconds
to zero.
• Press the LAP/SET/RESET button to select the min-
utes, hours, day, month and day of the week and
set them with the START/STOP button.
• Please note that during the setting of the hours
at first , A, P and then H appear.
• With regard to the 12 hour system, A (in the
morning) or P (in the afternoon) appears on the
display.
• In the 24 hour system, H appears on the display.
• Press the MODE button to confirm the settings.
• The display shows the current time and the icon
of the weekday is highlighted.
• Press the START/STOP button while in normal
mode to switch between time and date.
5.2 Alarms
Alarm clock function
• Press the MODE button twice while in normal
mode to enter the setting mode for the alarm
time.
• The icon of the hour and the day-of-the-week
start flashing.
• Press the START/STOP button to set the hours.
• The alarm symbol appears on the display.
• The alarm is activated.
• Press the LAP/SET/RESET button.
• The minute digits are flashing.
Seite 6
11

Publicidad

Tabla de contenido
loading

Tabla de contenido