1.3
Acronyms Used
Acronym
Term
MDA HD
Main Distribution Area High Density Patching System
RU
Rack Unit: a unit of measure used to describe the height of equipment intended
for mounting in a rack. Convention: One rack unit is referred to as "1RU", 2 rack
units as "2RU", etc.
"Multi-Fiber Push-On" connector
MPO
MTP™
A high performance MPO connector made by US Conec
"Lucent Connector" – a small form factor fiber optic connector utilizing a
LC
1.25mm diameter ferrule
"Standard Connector" – a fiber optic connector utilizing a 2.5mm diameter ferrule
SC
1.4
User Guide Icons
Info:
= General Information that is applicable in use of the HDF3168 MDA Frame System.
Tip:
= Best use recommendation for using the system.
Notice:
= Indicates a required action or predecessor.
Warning:
= Includes related warnings to prevent damage to equipment and/or injury.
1.5
Product Safety
Warning:
Fiber Optic devices transmit laser light which can damage vision. One or both of the
following warning labels are affixed on all applicable Leviton components throughout the
HDF3168 System.
1.6
References
TIA 568-C.0 Generic Telecommunications Cabling for Customer Premises
BICSI TDMM/ITSIMM – Reference for design, product requirements and installation practices
TIA 568-C.1 Commercial Building Telecommunications Cabling Standard
TIA 568-C.3 Optical Fiber Cabling Components Standard
TIA 569-B Telecommunications Pathways and Spaces (TIA 569–C soon to be published)
TIA 606-A Administration Standard for Telecommunications
TIA 607-B Telecommunications Grounding (Earthing) and Bonding for Customer Premises
TIA 942 Telecommunications Infrastructure Standard for Data Centers
IEEE 802.3Z Gigabit Ethernet
IEEE 802.3an 10GBase-T
IEEE 802.3ba 40Gbs and 100Gbs Ethernet – (If applicable)
Telcordia GR-63-CORE – Generic Requirements for NEBS (Network Equipment – Building Systems)
Physical Protection
DI-000-F3168-20B
Leviton HDF3168 Fiber Distribution System User Guide
8