Using The Detachable Front Panel - Insignia IN-MP101 Guia Del Usuario

USING THE DETACHABLE FRONT PANEL

To Detach the Front Panel
1. Press the (open) button, then the
front panel will be folded down.
Open
2. To remove the front panel, lift it up at a
little angle from horizontal position,
then first pull out the right side and
then pull out the left side.
The left side
Front Panel
3. For safekeeping, store the front panel
in the supplied protective case
immediately after being removed.
Protective Case
Front Panel
To Install the Front Panel
1. To install the front panel, first insert the
left side into proper position then insert
the right side into place.
The right side
6
The left side
Front Panel
2. When the two sides fixed into place,
push the front panel into main unit.
3. Note that if the front panel fails to lock
in position properly, pressing control
button may not function and the
display may be missing some
segments. Press the
and then reinstall the front panel again.
Precautions when handling
1. Do not drop the front panel.
2. Do not put pressure on the display or
control buttons when detaching or re-
installing the front panel.
3. Do not touch the contacts on the front
panel or on the main unit body. It may
result in poor electrical contact.
4. If any dirt or foreign substances
adhered on the contacts, they can be
removed with a clean and dry cloth.
5. Do not expose the front panel to high
temperatures or direct sunlight in
anywhere.
6. Keep away any volatile agents (e.g.
benzene, thinner, or insecticides) from
touching the surface of the front panel.
7. Do not attempt to disassemble the
front panel.
The right side
(open) button