Dolphin PRO OEM 24.40 Manual Tecnico página 21

CONNECTIONS
NOT_PRO_OEM-00
Marking Functionalities
L1_Winsta AC mains phase, max. 2.5mm²
N_Winsta AC mains neutral, max. 2.5mm²
PE_Winsta AC mains earth, max. 2.5mm²
-DC Battery negative (common), M8
stud
+DC1 Main battery positive, M8 stud
+DC2 Auxiliary battery 2 positive, M8 stud
+DC3 Auxiliary battery 3 positive, M8 stud
CHARGE Battery charge mode and rate
SELECT selector, 10 positions (0 to 9)
BATTERY FUSES Battery protection fuses (on the
–DC supply)
EXT COM1 CAN bus for link between chargers
RJ11 (master/slave)
Bus CAN CAN bus for link with external ma-
MicroFit nager
INT COM CAN bus for Touch type digital
display
TEMP SENSOR Battery temperature sensor (2 wires,
no polarity, no direction) positio-
ned on the main battery positive
terminal
RELAY Alarm dry contact
CONNECTIONS
NOT_PRO_OEM-00
Example of connection on the basis of 3 distinct
sets of batteries
Important
Check the quality of connections and proper
tightening of connections.
UK